wood cutting circular saw blade

Different Types of Diamond Saw Blades: Applications and Uses

Diamond saw blades are used in a wide range of industries and applications, leading to countless types being available on the market.

With such so many different types of diamond saw blades available, it can be difficult to know which one is best for your project. If you do not pick out the right type of blade for what you are planning to cut, you may end up damaging the saw or material being worked on.


Here is a quick guide on the different types of blades and how to choose the best diamond saw blades in Toronto for your project. Keep on reading to learn more.


Types of Saw Blade Rims

When you are searching for saw blades in Toronto, it is important to pay attention to the rim.

The rim of a saw blade is essential to how fast and clean the saw will cut. It also determines what materials the blade will cut best, if the blade is likely to overheat, and what method of cutting you should employ for your project.


Segmented Rim

A segmented rim is usually divided into 10-14 segments with a deep groove between each section. These grooves allow for improved airflow and heat transfer, making this type of blade ideal for dry cutting. However, it is important to know that these grooves do not give a clean cut.


Saws with segmented rims are ideal for thicker materials and require a quicker cutting speed. The materials you can cut with this type of rim include marble and granite slabs, concrete, asphalt, and brick.


Continuous Rim

A continuous rim is suitable for cutting hard materials that tend to chip. This kind of blade rim does not have any segments or any other type of built-in feature that will help keep it cool while cutting. For this reason, this type of blade is best used for wet cutting.

Continuous rim saw blades produce a very clean edge but are slow-cutting. This makes them ideal for delicate jobs, such as cutting thin marble, granite, ceramic, or porcelain tile.


Turbo Rim

Turbo rim blades use a continuous rim with a serrated edge to improve cutting speed while still providing a smooth cut.

The turbo rim is divided into sections designed to push air over the blade to keep it cool. This type of saw blade rim is suitable for both wet and dry cutting. It can cut various materials, including concrete, brick, marble, masonry, and tile.


Diamond Saw Applications

The design and features of a diamond saw blade will vary based on the material it is meant to cut. For each application, there will be a variety of blade types to suit different needs, including material thickness and the finish of the cut.


Wood Saw Blades

Depending on the blade's tooth design, a wood saw blade can either be crosscut, ripping, or a combination of the two.

A crosscut blade cuts across the lumber's grain, while a rip-cut blade will rip along the grain. A combination blade will do both, making it ideal for general use.


The more teeth a wood saw blade has, the finer the finish will be. However, more teeth will cause the blade to cut slower and create more friction and heat.


Masonry Saw Blades

Masonry saw blades typically have smooth edges with no teeth. There are three main types of masonry saw blades:

  • Segmented
  • Continuous
  • Cut-off wheel. The cut-off wheel is an inexpensive, abrasive, and short-lived wheel designed for grinding and smaller cutting projects.


Metal Blades

Depending on the metal it is designed to cut, a metal blade will typically either lean towards being a cut-off wheel or come in the form of a carbide blade.

Carbide blades are long-lived and have a variety of designs that can cut a wide range of metals of different types and thicknesses.


Finding Saw Blades in Toronto

Now that you know about the different types of saw blades, you can get started on choosing the best one for your cutting project.

If you need superior diamond blades in Toronto, we've got you covered.

Bomba Diamond Tools has been providing high-quality diamond saw blades in Toronto for over 40 years. Be sure to give us a call today to see how we can meet your diamond tool needs.