circular saw blades

How to Get the Most Use Out of Your Diamond Blade

If you want to produce high-quality, accurate cuts with your table saw, you’ll need a high-quality blade. With the right blade and the right amount of power, you’ll get an accurate cut every time.

That is why maintaining your saw blades is equally important. Without proper maintenance, your blade will dull, making it nearly impossible to achieve precise and accurate results.


Keep on reading to learn more about how to get the most use out of your diamond blade.


Maintain Your Blade

Diamond blades are incredibly strong. However, all diamond blades will become worn out and develop performance problems at some point.

A few simple maintenance and usage tips can help you get the most use out of your diamond blade. They will also reduce the chances that your saw blade bends or breaks.


Let’s start with inspecting your blade.


Inspect Your Diamond Blade Every Time

You should inspect both your saw and your blade every time before cutting. Double-check that you’ve set your saw to the correct depth before every cut.

Imagine, for instance, that you’ve set the blade too deep. In that case, both you and your machine are at risk. The blade could bind, and your stock could kickback.


Don’t Overheat it!

You should always think about the temperature of your equipment when working with your diamond blade. An overheated blade can damage your equipment and increase safety risks.


If you’re dry-cutting, it’s helpful to take breaks and give your blade time to cool. When wet cutting, make sure there’s a constant supply of water supplied to the blade during the entire cutting process.


Choose the Right Blade

Choosing the right blade is just as important as choosing the right circular saw. Your equipment will determine the kind of blade you should use. Blades with lower performance work best with low horsepower equipment.

Meanwhile, high-performance blades work better with high horsepower equipment. It’s crucial to match your blade with your equipment. If not, the blade may warp and cut less effectively.


Consider Wet Cutting

It’s always important to use the right tool for the job, and your blades are no exception. For example, materials like wood require dry cutting. Still, you’ll want to use the wet cutting method as often as possible when using a diamond blade.

Wet cutting keeps the blade cool. It also reduces heat buildup. These benefits lead to a longer diamond blade shelf life and also help to reduce dust.


Trust the Pros for the Best Saw Blades in Toronto

Now you know more about how to get the most use out of your saw blades. If you want the best diamond blades for the job, trust Bomba Diamond Tools. Whether you’re cutting asphalt with a diamond blade or need diamond blades for a grinder or circular saw, we’ve got you covered!

We manufacture our diamond blades right here in Toronto. Every blade we make is embedded with man-made diamond crystals that provide superior cutting power.


Bomba Diamond Tools offers a variety of diamond blades in Toronto and Scarborough at reasonable prices. Furthermore, our staff is always on hand for emergency services.

Feel free to visit our services section to learn more about how we can meet your diamond tool needs.